Table of Contents
Advertisement
Error Messages
Error Message
PT memory capacity insufficient.
Expand the image memory.
The PT image memory is an EEP-ROM.
The PT image memory is an EP-ROM.
Check the combination of PT Type,
Memory Size, and Direct Access settings.
Can't read file.
Can't read screen data.
Can't read or write data.
Can't save file.
Number of files is max.
Number of data directory files exceeds max.
Data this support tool
can't handle received.
ROM data that support tool
can't handle received.
196
(Confirm)
Increase the size of the PT screen memory.
In the case of an EEP-ROM or EP-ROM or Flash ROM, delete
data in file units
data in file units.
(Confirm)
Items displayed in red in the tool settings cannot be set.
(Confirm)
Either the disk is faulty, or data has been destroyed. Replace
the disk or delete the files and create them again If there is a
the disk or delete the files and create them again. If there is a
(Confirm)
backup disk, use that.
(Confirm)
Input the data directory name in the tool settings correctly, then
try again.
(Confirm)
The maximum number of files that can be handled by the sup-
port tool is 200. Delete unnecessary files (see 3-4 "File Selec-
tion Screen" on p.26).
Either the received data is destroyed, or the support tool you are
using is not compatible with the direct connection version of the
data. If the same message is displayed even when the latest
data If the same message is displayed even when the latest
support tool is used, create the data again.
Appendix B
Corrective Action
Advertisement
Table of Contents
