Creating Graphic Screens; Outline - Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual

Creating Graphic Screens

4-5

Creating Graphic Screens

4-5-1 Outline

b) When using Controller Link as the communications network, you
must create Controller Link data link tables, and register to each
node (refer to Appendix B FinsGateway Settings when Con-
nected Using Controller Link). Use Ethernet as the communica-
tions type if not creating data link tables.
4. When you have finished making all the PLC and computer settings, click the
OK Button in the System Monitor Settings Window. This completes the Sys-
tem Monitor settings.
The Graphic Screen displays schematically the device status.
Create the Graphic Screen using the Graphic Builder.
• Paste to the screen graphics representing plant instrumentation, which have
been pre-prepared, and use them to display the device status, to a maximum
of 200 screens.
• Pre-prepared fixed graphics: Text, instruments, thermometers, transmitters,
orifices.
• Pre-prepared changeable graphics:
Analog inputs: Bar graph displays, numerical value displays, tanks
Analog settings: Numerical settings (See note.)
Contact inputs (display): Pumps, valves, pipes
Contact settings (operation): Switches (See note.)
Note If setting analog values or contact settings, use AO Settings from Computer or
DO Settings from Computer Tags.
• For other fixed graphics, read and paste graphics created using bitmap files.
Basically, after cutting and pasting the background and other graphics, paste
the pre-prepared fixed or changeable graphic display elements mentioned
above to create the complete Graphic Screen.
Section 4-5
89