Table of Contents
Advertisement
"File List" Screen
Initial screen
Key input buzzer
Buzzer
Resume function
Alarm output
Backlight OFF
(prevention of
afterimage)
Printer:
Print way
Numeral tables
String tables
Alarm fast I/O
The following items can be set:
Number of the screen data displayed when the
PT is started up.
(Invalid when direct connection is used)
ON/OFF status of key input sound.
Buzzer sound ON/OFF or ON only when an
error occurs.
ON/OFF status of the "resume" function.
ON/OFF status of alarm output.
This is an afterimage prevention function which
automatically switches off the backlight (or
makes the display blank). The available
settings are to switch the backlight off after a
time lapse of 10 minutes/1 hour, or "off". With
an LED screen, this function switches the
backlight OFF. With an EL screen, it makes the
screen blank.
Type of printer connected to the PT: EPSON
Esc/P printer (24 pin) or HP LASER Jet.
Printing method used when printing a screen
displayed on the PT: color or grayscale (only
valid when using NT30C and NT610C).
The number of numeral tables: 512 or 1000 (if
reduced to 512, the memory capacity available
for screen data is increased by 4880 bytes).
The number of character-string memory tables:
256 or 1000 (if reduced to 256, the memory
capacity available for screen data is increased
by 29760 bytes).
Processing method when the maximum number
of alarm instances (256) is exceeded when
using the alarm history.
"Yes"
Old records are deleted as new ones
are registered.
"No"
The registration of new history records
is prevented.
On completion of setting, press the
Supported by all
NT models
Supported by
NT30, NT30C,
NT612G, and
NT610C only.
NT610C only.
key.
Section 3-4
C
29
Advertisement
Table of Contents
