Table of Contents
Advertisement
Common Setting Operations
Procedure 1. To make a copy setting, press [F3] (iCopySet), input the value to be added on
4-2-9
Searching Within a Memory Table
Procedure 1. Locate the bar cursor on the item to be searched for, press the [F5] (Srch) key,
78
<Operation>
copying, and the type of numerical value (decimal/hexadecimal), then press
the
key.
2. Locate the bar cursor at the item to be copied and press [F2] (iCopy).
The data will be copied to the next input field. Addition processing is carried
out in accordance with the nature of the copied data and the copy setting.
Repeated copy operations are possible by continuing to press the [F2] (iCopy)
key.
This function is used to search for data in a numeral or character-string memory
table.
The data that can be searched for are tabled below.
Type
Numeral memory table
Character-string memory table
Bit memory table
<Operation>
input the data to be searched for and the direction of the search, then press the
key.
The search will start. When the specified data is found, the bar cursor will be
located at its position.
2. To search for the next occurrence, press the
the [Esc] key.
Section 4-2
Details
Initial value
Word
Initial value
Word
Bit
key. To quit the search, press
Advertisement
Table of Contents
