Creating Input Settings
4-9-3
Setting Window Displays
(NT30, NT30C, NT612G, NT610C with Ver.3 or Later Only)
Procedure 1. Select "IN SET" from the initial editing screen.
Reference: To check the display status when another window is displayed, repeat steps 1
This is the procedure for setting windows to be displayed when a switch is made to
a character-string setting screen.
It is also possible to display a created window and check the display position etc.
during screen creation. It is possible to arrange elements on the screen so that
they do not overlap with the displayed window.
The input setting menu will be displayed.
2. Select "KEYBD/WINDOW DISP" from the input setting menu.
3. Specify the screen number of the window to be displayed when the screen is
displayed and press the
The specified window will be displayed.
If "0" is specified, the window display disappears, and when the screen is dis-
"
played during operation, it is displayed without the window.
through 3.
key.
Section 4-9
135