Table of Contents
Advertisement
Common Setting Operations
Reference Input Procedure
Procedure 1. Press the
76
Short cut keys can also be used (see p.55).
Example
Specifying link relays (LR) for allocated bits:
Input
[
]
[L01]
[LR0212]
[12]
[Ir5601]
[ LR914]
[L999999]
If you are not sure of the types of bit and channel that can be specified, it is possible
to display a list of the types that can be specified and select the type from among
these. It is also possible to input a comment at this time.
<Setting method>
key in the allocated bit/word input field, then press [F1] (Ref
Inpt).
The window shown below will be displayed.
2. Specify the type of bit or word by pressing the corresponding function key. If a
type that cannot be input in the input field is selected, the selection is ignored.
3. Input the bit or word number with the numeral keys and press the
input number exceeds the upper limit, a warning "pip" will sound and the num-
ber will be changed to the maximum possible value.
If input is performed correctly, the cursor will shift to the comment input field.
4. If required, input a comment, then press the
quired, just press the
The window closes, and the bit/word number and comment are displayed in
the original input field.
After Input
[
]
[L000001]
[L000212]
[ 000012]
[L005601]
[L000914]
[L006300]
key.
Section 4-2
key. If the
key. If no comment is re-
Advertisement
Table of Contents
