Table of Contents
Advertisement
Common Setting Operations
4-2-3
Specifying the Display Color (NT30C, NT610C Only)
Green (Basic color)
66
When using the NT30C or NT610C, both the color used to display characters and
graphics and the color used for the background can be specified. Depending on
the screen elements created, the following colors can be specified.
Characters/Numeric Values
S Display color:
S Background color:
A
Graphics
S Basic color:
S Background color:
S Boundary color:
Graphic
Lamps/Touch Switches
S Frame color:
This specifies the color of the frame if "Frame" is set for
frame
display.
S Ptot color:
This specifies the color of a lamp or touch switch when it is
OFF. If transparent color is specified, the elements
underneath can be seen through the OFF color.
S Lit color:
This specifies the color of a lamp or touch switch when it is
ON.
Specifies the color of characters and numeric values.
Specifies the color of the background to characters
and numeric values. If
specified, the background becomes transparent and
elements underneath it can be seen through it.
Background color
Character color
In the case of graphics drawings this is the color of
lines and in the case of tiled figures it is the color of the
tiling.
Specifies the color that will be the background after a
graphic has been tiled (the color that can be seen in
the gaps in a pattern). If transparent color is
specified, the elements underneath can be seen
through the background.
Specifies the color that indicates the boundaries of
tiled areas.
Tiling
Boundary line color
Pattern display color (Basic color)
Pattern background color
Section 4-2
(transparent color) is
Advertisement
Table of Contents
