Table of Contents
Advertisement
Editing Screen Data
Centering
Reference: S In the case of lamps, only those characters that are completely contained within
Procedure 1. Select "EDIT" from the initial editing menu.
This is the procedure for centering labels or character input (fixed display) to locate
them at the center of a lamp or touch switch display area (this positional adjust-
ment is only performed in the left/right direction; the position in the vertical direc-
tion remains unchanged).
the area of the graphic will be subject to the centering operation.
S In the case of touch switches, only those characters that are completely con-
tained within the sensitive area will be subject to the centering operation.
Sensitive area
2. Select "Centering" from the editing menu.
3. Select the object of the centering operation (a lamp or touch switch).
4. Check the message and then press the
To abort centering, press the [Esc] key.
"
Display area
Section 4-15
Only "ABC" is centered.
Only "EFG" is centered.
key.
153
Advertisement
Table of Contents
