In-Vehicle Test - Autel MSOBD2KIT User Manual

6.2 In-vehicle Test

In-vehicle Test is used for testing batteries that are installed in a vehicle. An in-vehicle
test includes Battery Test, Starter Test, and Generator Test. These tests help determine
the health status of the battery, the starter, and the generator.
IMPORTANT
A disclaimer page will appear when accessing any function on the Home screen for the
first time. Please read the end user agreement and tap Accept to continue. If you tap
Decline, you will not be able to use the features properly.
NOTE
The complete in-vehicle test includes battery test, starter test and generator test, in
sequence.
Prior to testing any battery, ensure that the battery tester is paired with the tablet via
Bluetooth and is connected properly to a battery.
6.2.1 Start the Test

To start the battery test
1. Tap Battery Test from the MaxiSys Job Menu. Select In-vehicle Test.
2. Confirm your vehicle information and make sure the VIN information is filled.
3. Confirm your battery information, including voltage, type, standard, and capacity.
Tap Next to continue.
Figure 6-2 Battery information Screen
63