Auto Scan - Autel MSOBD2KIT User Manual


Confirmation Messages
These usually appear as an "Information" screen, when you are about to perform an
action that cannot be reversed or when an action has been initiated and your confirmation
is needed to continue.
When a user-response is not required, the message only appears briefly.

Warning Messages
These appear when completing the selected action may result in an irreversible change
or loss of data. An example of this message is the "Erase Codes" message.

Error Messages
These appear when a systemic or procedural error has occurred. Possible errors include
cable disconnection and communication interruption.
4.2.2 Making Selections
The Diagnostics application is a menu-driven program that presents a series of options.
As you select from a menu, the next menu in the series appears. Each selection narrows
the focus and leads to the desired test.

4.3 Auto Scan

The Auto Scan function performs a comprehensive scanning of all the systems in the
vehicle ECU to locate faults and retrieve DTCs. Tap Fault Scan at the bottom of the
screen to start.

To perform the Auto Scan function
1. Tap the Diagnostics application button on the MaxiSys Job Menu. Choose the
corresponding vehicle information and enter the Main Menu screen.
2. Select Auto Scan on the Main Menu to enter the diagnostics interface.
3. Tap the Fault Scan button at the bottom of the screen to scan the vehicle
system modules.
29