AXIOMTEK IPC920 Series User Manual page 86

IPC920 Series User's Manual
Save Changes
➢
When finishing the system configuration settings, select this option to save changes. Select Save
Changes from the Save & Exit menu and press <Enter>. Select Yes to save changes.
Discard Changes
➢
Select this option to quit Setup without making any permanent changes to the system
configuration. Select Discard Changes from the Save & Exit menu and press <Enter>. Select Yes to
discard changes.
Restore Defaults
➢
After selecting this option, all the settings will be restored to defaults automatically. Select Restore
Defaults from the Save & Exit menu and press <Enter>.
Save as User Defaults
➢
Select this option to save your current system configuration settings as User Defaults. Select Save as
User Defaults from the Save & Exit menu and press <Enter>.
Restore User Defaults
➢
After selecting this option, all the settings will be restored to user defaults automatically. Select
Restore User Defaults from the Save & Exit menu and press <Enter>.
Boot Override
➢
Select a drive to immediately boot that device regardless of the current boot order.
78 AMI BIOS Utility