Table of Contents
Advertisement
The IPC920 Series products are convenient for your various hardware configurations, such as CPU (Central
Processing Unit), memory module, HDD (Hard Disk Drive) and PCIe/PCI card. Chapter 2 will show you how
to install these hardware parts.
2.1
Installing the Processor
The Intel® Core™ i9/i7/i5/i3 processors are available as a boxed processor for the IPC960A / IPC962A /
IPC964A system. Intel recommends the processors should be installed by a qualified computer professional
since this electronic device may cause serious damage to the installer, system and processor if installed
improperly.
Note:
Before attempting to install a new processor, carefully review the documentation that
came with your system and make sure that you will not be voiding your warranty by
opening the computer or replacing your processor.
Instructions:
1.
Make sure that your system can accommodate the Intel® Core™ i9 i7/i5/i3/Celeron® processor that
you want to install. Check for CPU card, BIOS, and thermal compatibility by using the manufacturer's
documentation for the system, or by contacting the vendor if necessary. This processor should only
be installed in systems supporting the Intel® Core™ i9/i7/i5/i3/Celeron® processors.
2.
Obtain access to your processor socket as described in the documentation for your system.
3.
If the cooling solution prevents you from accessing the processor socket, you may need to remove
it. Instructions on how to remove your cooling solution should be provided in the documentation
that came with the system.
Hardware Installation
HARDWARE INSTALLATION
IPC920 Series User's Manual
SECTION 2
27
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC920 Series and is the answer not in the manual?
Questions and answers