Table of Contents
Advertisement
The AMI UEFI BIOS provides users with a built-in setup program to modify basic system
configuration. All configured parameters are stored in a 16MB flash chip to save the setup
information whenever the power is turned off. This chapter provides users with detailed
description about how to set up basic system configuration through the AMI BIOS setup utility.
3.1
Starting
To enter the setup screens, follow the steps below:
1.
Turn on the computer and press the <Del> key immediately.
2.
After you press the <Del> key, the main BIOS setup menu displays. You can access the other setup
screens from the main BIOS setup menu, such as the Advanced and Chipset menus.
Note:
If your computer cannot boot after making and saving system changes with
Setup, you can restore BIOS optimal defaults by setting JP1 (see section
1.6.2).
It is strongly recommended that you should avoid changing the chipset's defaults. Both AMI and your
system manufacturer have carefully set up these defaults that provide the best performance and reliability.
AMI BIOS Utility
IPC920 Series User's Manual
SECTION 3
AMI BIOS UTILITY
47
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC920 Series and is the answer not in the manual?
Questions and answers