Output Specifications; Fx 3Uc Series Main Unit (Transistor Output - Mitsubishi MELSEC-F FX3U Series User Manual

FX /FX Series PLC User's Manual - Positioning Control Edition
3U 3UC
Built-in Positioning Function
2.5

Output Specifications

2.5.1 FX Series main unit (Transistor Output)
3UC
This section describes the transistor output specifications of the FX
simultaneous turning-on rate is restricted for the output extension units and the main unit. For details on this
restriction, refer to the following manual:
Item
External voltage
Maximum load
Open-circuit leakage current
ON voltage
Response time
Circuit insulation
Indication of output motion
Pulse output terminals Y000, Y001, and Y002 are high-speed response output terminals.
To use the positioning instruction, adjust the load current of the NPN open collector to 10 to 100 mA (5 to 24V DC).
Item
Operation voltage range
Operation current range
Output frequency
1. Internal output circuit
FX Series
3UC
main unit
*1. To ground the unit, refer to the servo amplifier (drive unit) manual. If the grounding method is not
specified, carry out class-D grounding.
All outputs
Y000 to Y003
Resistance load
Y004 to Y017
Y000 to Y003
Inductive load
Y004 to Y017
All outputs
All outputs
Y000 to Y003
OFF→ON
Y004 to Y017
Y000 to Y003
ON→OFF
Y004 to Y017
All outputs
-
Description
5 to 24V DC
10mA to 100mA
100 kHz or less
Pulse train signal
Y0
Y4
COM1
Series main unit. Note that the
3UC
→ Refer to the FX
Transistor output specifications
5 to 30V DC
0.3 A/point The total load current of the common
items (16 points) should be 1.6 A or
0.1A/1point
less.
7.2W/1point
The total load of the common items
(24V DC)
(16 points) should be 38.4 W or less at
2.4W/1point
24V DC.
(24V DC)
0.1 mA or less at 30V DC
1.5V
5 µs or less at 10 mA or more (5 to 24V DC)
0.2 ms or less at 100 mA (at 24V DC)
5 µs or less at 10 mA or more (5 to 24V DC)
0.2 ms or less at 100 mA (at 24V DC)
Photo-coupler insulation
Monitored using display module
5 to 24V DC
Direction signal
Grounding
2 Specifications
2.5 Output Specifications
Hardware Edition.
3UC
Servo amplifier
(Drive unit)
*1
B - 19
A
B
Apx.