Fx 3Uc Plc - Mitsubishi MELSEC-F FX3U Series User Manual

FX /FX Series PLC User's Manual - Positioning Control Edition
3U 3UC
Common Items
2.2 FX PLC
3UC
FX Series
3UC
C
*1. Depending on the product, connect either the terminal board or the MIL connector (20-pin).
Note:
• Use FX -1PS-5V (extension power supply unit) only if the 5V DC power supply unit incorporated in the
3UC
FX PLC does not have enough capacity.
3UC
• For details of the connectable special extension blocks and system configuration, refer to the following
manual.
and show the unit positions.
B C
B
(For details of installation, refer to the manuals of special adapter and special
function units/blocks.)
C
B
FX -1PS-5V
3UC
C
Special function
Special function
FX -CNV-IF
2NC
MIL connector (20-pin)
POWER
ERROR
START
DOG
PGO
X0
FX -10PG FP
2N X1 RP
f A
CLR
f B
Terminal board (M3)
MIL connector (20-pin)
block
unit
→ Refer to the FX
→ Refer to the FX
2 Unit Connection
2.2 FX3UC PLC
Servo motor or
Stepping motor
*1
Hardware Edition.
3UC
Hardware Edition.
3UC
A - 9
A
B
Apx.