Step 8. Remove Shipping Channels And Blocking - MacDon A30-S Unloading And Assembly Instructions

STEP 8. REMOVE SHIPPING
CHANNELS AND
BLOCKING
E
A
C
B
a. Remove bolts (A) and (B), and remove banded
link and arm (C) from shipping channel (D) at
each float spring mount. Retain bolts (A) and (B)
for re-installation.
b. Remove bolts (E), and remove shipping channel
(D). Discard.
F
c. Remove banding, and remove the two shipping
angles (F). Discard.
169001
UNLOADING AND ASSEMBLY
D
d. Remove banding at ends of shipping beam, and
e. Remove banding at center-link location.
f.
14
CAUTION
Keep feet clear when removing banding.
let beam fall to ground.
G
Loosen float springs by turning bolts (H)
counterclockwise on both sides of frame, so that
blocks (G) can be removed.
H
Revision E