Step 6. Remove Shipping Stands - MacDon A30-S Assembly Instructions Manual

D
C
h. Remove lynch pin from pin (C).
i. Hold stand (D) and remove pin (C).
C
j. Invert stand (D) and reinstall on header leg in
upper hole location with pin (C). Secure pin with
lynch pin.
In soft conditions use a 2x4 block under
stand.
k. Lower header onto stand (D).
Form # 169078
UNLOADING AND ASSEMBLY
D
NOTE
STEP 6. REMOVE SHIPPING
STANDS
F
a. Remove two bolts (E) from shipping stand (F).
b. Remove hairpin from pin (G).
c. Hold shipping stand (F), remove pin (G), and
remove stand. Discard stand and hardware.
d. Repeat above steps for opposite shipping stand.
J
e. Remove four bolts (H) and remove angle (J).
Discard angle and hardware.
11
E
G
H
Model Year - 2009