Header Drive: A30-D - MacDon A30-S Unloading And Assembly Instructions

D. HEADER DRIVE: A30-D
REEL DRIVE CHAIN (1 PLC)
SICKLE DRIVE BEARING (1 PLC)
AUGER SHAFT BEARING (1 PLC)
GAUGE ROLLER BEARINGS (2 PLCS) -
BOTH SIDES
169001
PRE-DELIVERY CHECKS
SAE 30
39
REEL SHAFT BEARING (1 PLC)
Disulphide (NLGI Grade 2)
SICKLE HEAD BEARING (1 PLC)
NOTE
To prevent binding and/or excessive wear
caused by sickle pressing on guards, do not
over grease. If more than 6 to 8 pumps of the
grease gun are required to fill the cavity,
replace the seal in the sickle head.
High Temperature
Extreme Pressure (EP2)
Performance With 1%
Max Molybdenum
Lithium Base.
Revision E