A. HEADER DRIVE: A30-S
AUGER SHAFT BEARING (1 PLC)
REEL SHAFT BEARING (1 PLC)
169001
PRE-DELIVERY CHECKS
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
36
AUGER DRIVE BEARING (1 PLC)
SAE 30
AUGER DRIVE CHAIN (1 PLC)
SICKLE HEAD BEARING (1 PLC)
NOTE
To prevent binding and/or excessive wear
caused by sickle pressing on guards, do not
over grease. If more than 6 to 8 pumps of
the grease gun are required to fill the cavity,
replace the seal in the sickle head.
Revision E