Performing An Exposure Using A Cr Cassette - AGFA DX-D 300 User Manual

62 | DX-D 300 | Operation

Performing an exposure using a CR cassette

Topics:
• Step 1: retrieve the patient info
• Step 2: select the exposure
• Step 3: Prepare the exposure
• Step 4: Check the exposure settings
• Step 5: Execute the exposure
• Step 6: repeat steps 2 to 5 for the next subexposures
• Step 7: digitize the image
• Step 8: perform a quality control
0172G EN 20230627 1651
Note: Using an ID Tablet to identify cassettes before the exposure
will break the communication of X-ray parameters between the NX
workstation and the X-ray generator console. It is advised to
identify cassettes after the exposure, as described in this workflow.