Cleaning - AGFA DX-D 300 User Manual

Cleaning

To clean the exterior of the equipment:
1. Stop the system.
2. Wipe the exterior of the device with a clean, soft, damp cloth. Use a mild
soap or detergent if required. Do not use any corrosive, dissolving or
abrasive cleaning or polishing agents. Make sure no liquid gets in the
device.
Using unsuitable cleaning agents or methods can damage the property
when surface becomes dull and brittle (e.g. alcohol-containing agents).
3. Start up the system.
CAUTION:
Wet cleaning of the equipment while it is connected to the
electric circuit includes the risk of electric shock and of short
circuit.
CAUTION:
Clean the equipment with only a little moisture.
Note: Do not open the equipment for cleaning. No components
inside the device require cleaning by the user.
DX-D 300 | Introduction | 41
0172G EN 20230627 1651