Filter Status - AGFA DX-D 300 User Manual

76 | DX-D 300 | Operating the DX-D Software Console

Filter Status

On systems with automatic filtering, the filter is automatically set, based on
the selected exposure.
The filter setting can be modified on the software console or on the collimator.
• on the software console, click the filter status drop-down arrow and select
the filter from the list.
• on the collimator, use the filter button
Table 4: Collimator with automatic filter
(no icon)
Table 5: Collimator with manual filter
(no icon)
0172G EN 20230627 1651
No filter is used.
A filter is used. Material and thickness of the filter are speci-
fied.
No filter is required.
A filter is required. Insert the filter manually.