D
4500 U
RYSTAR
SER MANUAL
Cleaning the exterior
Switch off the Drystar 4500 by following the procedure as described in
1
'Switching off the Drystar 4500'
Remove the power plug from the socket.
2
Remove the network cable.
3
Wipe the exterior of the printer with a clean, soft, damp cloth.
4
Use a mild soap or detergent if required but never use an ammonia-based cleaner. Be
careful not to get any liquid in the power cord port.
Plug in the printer and switch it on by following the procedure as described in
5
'Switching on the Drystar 4500'
62
Advanced operation (key-operator mode)
on page 28.
on page 26.
2801E EN 20050215