Setting Capacity Limit - Huawei LUNA2000-200KWH-2H1 User Manual

Smart string ess
Hide thumbs Also See for LUNA2000-200KWH-2H1:
Table of Contents

Advertisement

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Step 2 Short-circuit the water sensor and check whether a water alarm is generated on
the SmartLogger WebUI or CMU WebUI:
After the alarm is cleared, choose Monitoring > Running Param. > Fire
suppression > Starting up on the SmartLogger WebUI or CMU WebUI.
Figure 10-24 Restoring the power supply
Step 3 Check whether an alarm is generated for the Smart Rack Controller on the
SmartLogger WebUI or CMU WebUI. If an alarm is generated, handle the alarm by
referring to the handling suggestions in the alarm reference section.
----End

10.8 Setting Capacity Limit

Context
Issue 03 (2023-03-30)
NO TE
● You are advised to use the SmartLogger WebUI.
● If Door Status Alarm is generated, check whether the cabinet door is open. If yes, close
the door.
● If ESU Communication Failure is generated, check whether communications cables are
connected correctly and whether the power supply is normal.
If a water alarm is generated, the water sensor is properly connected. In this
case, the water alarm will be cleared after the short circuit is removed.
If no water alarm is generated, check whether the water sensor cable is
connected properly.
Time-of-use (TOU) with capacity limit:
When the capacity limit is enabled in TOU mode, the charge/discharge time
set in the TOU window must cover 24 hours a day. Capacity limit is not
supported in non-charge/discharge time.
Capacity limit:
If the capacity limit is met 24 hours a day, the ratio of the ESS/PCS to the
load power must be properly set to ensure that the ESS/PCS have
sufficient capacity to meet the capacity limit.
When the ESS is used only for capacity limit, you can set the charge time
to 24 hours through the TOU setting. Do not set the discharge time and
non-charge/discharge time.
The overload capability of transformers, power distribution switches, and
cables must be greater than the sum of the maximum charge current and
maximum load current of the ESS.
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 SmartLogger Web-based Deployment
142

Advertisement

Table of Contents
loading

This manual is also suitable for:

Luna2000-200kwh-100kw-2h1

Table of Contents