Huawei LUNA2000-200KWH-2H1 User Manual page 123

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Figure 8-16 Removing the fastener
Step 3 Connect one end of the optical jumper to the fiber adapter.
Step 4 Route the other end of the optical jumper through the cable hole on the side of
the ATB, and connect the cable to the ATB.
Step 5 Connect the peripheral optical fiber cable to the ATB, splice the optical fiber cable
and the optical jumper, and then wind the spliced cable around the fiber spool on
the ATB.
Figure 8-17 Connecting optical fiber cables
Step 6 Check that the cables are connected correctly and securely. Then reinstall the
optical fiber cable fastener and external mechanical parts.
----End
Issue 03 (2023-03-30) Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Installing Cables
114