Huawei LUNA2000-200KWH-2H1 User Manual page 215

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Paint Damage
Deep scratch
(primer damaged,
steel base
material exposed)
Logo and pattern
damage
Dent
Procedure
Step 1 Gently polish damaged areas using fine sandpaper to remove smudges or rust.
Figure B-1 Polishing a damaged area using sandpaper
Issue 03 (2023-03-30)
Tool and
Material
Spray paint or
paint, zinc-rich
primer, brush
(required for
repainting a small
area), fine
sandpaper,
anhydrous
alcohol, cotton
cloth, paint spray
gun (required for
repainting a large
area)
If a logo or pattern is damaged,
provide the logo size and color
number. Seek help from a local
supplier of advertisement coatings to
formulate a repair solution based on
the logo size, color, and damage.
1. If a dent is less than or equal to
100 mm
mm in depth, fill the dent with
Poly-Putty base and then perform
the same operations as those for
processing deep scratches.
2. If a dent is greater than 100 mm
area or greater than 3 mm in
depth, ask the local supplier for an
appropriate repainting solution.
Copyright © Huawei Digital Power Technologies Co., Ltd.
B How Do I Repair Paint Damage?
Procedure
Steps 1, 2, 3, 4,
and 5
2
in area and less than 3
Description
or brushing is
recommended.
3. For many
scratches or
large-area
smudges and
rusts, use a
paint spray
gun.
4. The paint
coating should
be thin and
even. Paint
drops are
prohibited on
the coating.
The surface
should be
smooth.
5. Leave the
repainted area
for
approximately
30 minutes
before
performing any
further
2
in
operation.
206