Huawei LUNA2000-200KWH-2H1 User Manual page 148

Smart string ess
Hide thumbs Also See for LUNA2000-200KWH-2H1:
Table of Contents

Advertisement

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
6.
Issue 03 (2023-03-30)
Parameter
Preferred use of
surplus PV
power
Maximum
power for
charging
batteries from
grid
Active power
threshold of grid
during battery
discharge
Adjustment
deadband
Automatic SOC
calibration
Start time
End time
Charge/
Discharge
Repeat
Connect to a Huawei network management system (NMS).
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 SmartLogger Web-based Deployment
Description
Charge preference: When the PV energy is
greater than the loads, excess PV energy is used
to charge the ESS. After the maximum charge
power is reached or the batteries are fully
charged, the excess PV energy is fed to the grid.
Fed to grid: When the generated PV energy is
greater than the loads, the excess PV energy is
preferentially fed to the grid. When the
maximum output power of the inverter/Smart
PCS is reached, the excess energy is used to
charge the batteries. This setting is applicable to
the scenario where the feed-in tariff (FIT) is
higher than the electricity price. The batteries are
used only for backup power.
Set the maximum power for charging the batteries
from the power grid.
Control the maximum target grid power when the
grid-connection point has zero power.
Allowed fluctuation of the target grid power for the
grid-connection point
Enable: Automatic SOC calibration is enabled. If
the total charge and discharge energy reaches
the threshold or the calibration function has not
been triggered for 30 days, the SOC automatic
calibration is performed. The SOC automatic
calibration is performed in battery racks. During
calibration, the cut-off SOC settings will be
ineffective.
Disable: Automatic SOC calibration is disabled.
Set the Charge/Discharge time. A maximum of 14
time segments can be set. You can set a cycle by
week by clicking the buttons corresponding to Mon.
through Sun. in the Repeat box. The buttons are
blue by default, indicating selected. After you click
it, the button turns gray.
139

Advertisement

Table of Contents
loading

This manual is also suitable for:

Luna2000-200kwh-100kw-2h1

Table of Contents