LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Step 5 Turn on the DC circuit breaker of the charger.
Step 6 Operate the charger according to its manual.
Step 7 After the charge and discharge are complete, wait until the fan in the charger
keeps running for about 5 minutes to dissipate the residual heat, turn off the AC
and DC circuit breakers, and remove the cables.
----End
4.3 Smart Rack Controller Storage
If a Smart Rack Controller will not be used immediately, store it according to the
following requirements:
●
●
●
Issue 03 (2023-03-30)
Do not remove the packaging. Check the packaging regularly (recommended:
once every three months). Replace any packing materials that become
damaged during storage. If the Smart Rack Controller is unpacked but will not
be used immediately, put it back to the original packaging with the desiccant,
and seal with tape.
Storage temperature: –40°C to +70°C (–40°F to +158°F); humidity: 5%–95%
RH
Stack Smart Rack Controllers with caution to prevent them from falling over,
resulting in personal injury or equipment damage.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Storage Requirements
65