Table of Contents
Advertisement
•
A—Hazard zone. The region of space where the projection light from the laser-illuminated
projector is above emission limits for Risk Group 2. The light intensity may cause eye damage
after a momentary or brief exposure (before a person can avert their eyes away from the light
source). The light may cause skin burns to occur.
•
B—Hazard distance. Operators must control access to the beam within the hazard distance
or install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
•
C—No access zone. Horizontal clearance of the no access zone must be a minimum of 1.0
meters (3.3 feet).
•
D—Vertical distance to hazard zone. The hazard zone must be no lower than 2.5 meters/8.2
feet (US installations) or 2.0 meters/6.6 feet (global installations) above any surface upon
which any persons are permitted to stand.
If the vertical distance to hazard zone requirement (Zone D) is satisfied, the horizontal
clearance distance (Zone C) is not needed.
•
E—Represents the top view of the projector.
•
F—Represents the side view of the projector.
The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to
its most hazardous position.
Projection lens
0.83-1.2:1
1.2-1.72:1 DLP Cine zoom
1.33-2.1:1 DLP Cine zoom
1.62-2.7:1 DLP Cine zoom
2.09-3.9:1 DLP Cine zoom
CP2406-RBe hazard distance graph
Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe
020-103907-01 Rev. 1 (03-2024)
Copyright
©
2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Part number
Hazard distance
(m)
108-498102-XX
N/A
108-494108-XX
See hazard distance
graphs below
108-495109-XX
108-496100-XX
108-497101-XX
Introduction
Category
RG2
RG3
9
Advertisement
Table of Contents
