Lens caps must be removed or they can melt and damage the lens.
6. Insert the lens straight into the lens mount opening without turning.
Magnets inside the lens mount help position the lens.
7. Insert and tighten the two lens mount hex screws shipped separately with the projector.
8. Lock the lens assembly in place.
The lens clamp can be turned manually but Christie recommends using a hex key to turn it to
the correct position.
9. Replace the lens surround.
Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe
020-103907-01 Rev. 1 (03-2024)
Copyright
©
2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
24