12K42
12K42
ErgoArm plus
ErgoArm plus
•) Fixation fork
•) Lamination protection cover (disk with
arrow)
Additional parts required:
... lamination ring
Remove the lamination ring.
12K42 ErgoArm plus, 12K44 ErgoArm Hybrid plus, 12K50 ErgoArm Electronic plus
12K44
12K44
ErgoArm Hybrid plus
ErgoArm Hybrid plus
Scope of delivery
•) Fixation fork
•) Lamination protection cover
(hollow ball)
•) Lamination protection cover (disk with
arrow)
Additional parts required:
... Battery Mounting Set
... lamination ring
Laminating the humeral segment
1
To dismantle and prepare for lamination,
flex the arm fully. Turn the "finger wheel" to
minimum compensation and then extend the
arm completely.
Insert the fixation fork 1 into the band
cam to secure the band cam to the ex-
tension stop.
Take out the countersunk screw.
Remove the band clamp.
Remove the lamination ring.
Push the electronics housing out of lamina-
tion ring.
Safety instructions
12K50
12K50
ErgoArm Electronic plus
ErgoArm Electronic plus
•) Fixation fork
•) Lamination protection cover
(hollow ball)
•) Lamination protection cover (disk with
arrow)
•) Conical cord stopper
Additional parts required:
... Battery Mounting Set
... lamination ring
... coding plugs / (13E182)
Ottobock | 29