Modifying And Servicing The Forearm; Removing The Elbow Joint - Otto Bock 12K42 ErgoArm plus Instructions For Use Manual

Safety instructions
12K42 12K42
ErgoArm plus ErgoArm plus
36 | Ottobock
12K44 12K44
ErgoArm Hybrid plus ErgoArm Hybrid plus
The illustration shows that the plate and
brim of the lamination ring are level with
each other.
The electronics housing is fully inserted.

Modifying and servicing the forearm

Removing the elbow joint

1
Flex the arm fully. Turn the "finger wheel"
to minimum compensation and then extend
the arm fully.
Insert the fixation fork [1] to hold the cam
against the extension stop.
Lock the elbow joint in this position before
performing additional procedures.
Gently pop off both joint caps.
Carefully pry out the cable plugs.
12K42 ErgoArm plus, 12K44 ErgoArm Hybrid plus, 12K50 ErgoArm Electronic plus
12K50 12K50
ErgoArm Electronic plus ErgoArm Electronic plus