Scope Of Delivery; Preparing The Product For Use - Otto Bock 4R11 Quickchange Instructions For Use Manual

3 General safety instructions
CAUTION! Risk of injury and risk of product damage
► To prevent mechanical damage, use caution when working with
the product.
► Note the combination possibilities/combination exclusions in the
instructions for use of the products.
► Observe the maximum lifetime of the product.
► Check the product for damage and readiness for use prior to
each use.
► Do not expose the product to excessive strain (section: "Area of
application" see page 7) or to prohibited environmental conditions
(see page 7).
► Do not use the product if it is damaged or in a questionable con­
dition. Take suitable measures (e.g. cleaning, repair, replace­
ment, inspection by the manufacturer or a specialist workshop).
► Keep the product away from devices and items that are sensitive
to magnetic fields. (e.g. pacemakers, electronic devices, swipe
cards). The magnets in the product may affect or damage other
devices and objects.
► Pay attention to any information of the manufacturer regarding
magnetic fields (e.g. for a medical implant).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an
altered gait pattern, a change in the positioning of the prosthetic com­
ponents relative to each other and by the development of noises.

4 Scope of delivery

Quant­ Designation
ity
1 Instructions for use
1 Quickchange – base with lock­
ing ring
4 Set screw
8
Designation
Quickchange connection: Pyramid
Quickchange connection: Pyramid receiver
Quickchange connection: Threaded connector,
modular system
Quickchange connection: Threaded connector,
modular system for children
Pyramid receiver reduction
Set screw – 12 mm
Set screw – 14 mm
Set screw – 16 mm

5 Preparing the product for use

Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
Improper assembly of the screw connections
Risk of injury due to breakage or loosening of the screw connec­
tions
► Clean the threads before every installation.
► Apply the specified torque values.
Reference number
► Follow the instructions regarding the length of the screws and
–
4R11=R-3-2
Observe the alignment of the prosthesis for all combinations.
506G3=M8x14
Spare parts/accessories
CAUTION
CAUTION
about how to secure the screws.
INFORMATION
Reference num­
ber
4R11=P-1-1
4R11=R-1-1
4R11=ST-1-1
4R11=ST-2-1
4X907=1
506G3=M8X12-V
506G3=M8X14
506G3=M8X16