Quick Configuration Display - Paradyne COMSPHERE 3920PLUS Technical Reference Manual

COMSPHERE 392xPlus Modems

Quick Configuration Display

The Quick Configuration display indicates the basic operational characteristics of the modem.
The modem's Quick Configuration information appears on the LCD's bottom line.
To access the Quick Configuration display from the Top-Level display, press the
on the configuration of the modem, one of two screens appears.
If the modem is not operating with V.34 modulation, the following screen appears.
If the modem is operating with V.34 modulation, the following screen appears.
The V.34 modulation Quick Configuration information appears on the LCD's top line.
For more information on V.34, refer to the
3-14
Leased:33.6
Status Configure
F1 F2 F3
Leased:19.2
abbb cdd ee f f f f
F3
F1 F2
xxxx yyyyy zz
abbb cdd ee f f f f
F3
F1 F2
In Dial mode, where Automode automatically adapts to the
modulation scheme of the remote modem, the V.34 Quick
Configuration display may not necessarily indicate the actual (V.34)
online modulation.
October 1998
>
>
NOTE
V.34 section in Chapter 4, Status Branch.
key. Based
3920-A2-GH30-40