Paradyne COMSPHERE 3920PLUS Technical Reference Manual page 152

Configure Branch
Table 5-14
(3 of 5)
Miscellaneous Configuration Options — Singleport Mode A
SpecialSecurity: Disable
Nxt Disable RemAccsPswd CallbkDir#
This configuration option only appears when the modem is in Dial Only mode or Lease Answer Mode, and
Answer Security Mode is configured for No_Answ_Sec.
Special Security. Provides two types of security that are not as rigorous as the standard security described in
Chapter 12, Dial Access Security. Special Security is not restricted to Asynchronous or Singleport Mode.
Disable – No callback directory number or remote access password reception are required to answer a call. The
Dir#1_Callback configuration option can be used, or no callback security can be used.
RemAccsPswd – The modem uses its remote access password. A matching remote access password must be
transmitted as an 8-digit tone from the originating modem (like a VF password) before the answering modem will accept
the call. The answering modem will disconnect the call if no password is received within the entry wait timeout or the
received password does not match the remote access password.
CallbkDir# – When selected, the remote callback directory number must be transmitted as a 2-digit tone from the
originating modem (like a VF password) before the answering modem will accept the call. The answering modem will
disconnect the call after receiving the callback directory number or when the entry wait timeout expires. If the received
directory number is valid, the answering modem uses it to locate the phone number of the originating modem for
callback.
NOTE: This selection only appears when the Dir#1_Callback configuration option is set to Enable.
The AT command is S-Register S25 = n, where n is 0 for Disable, 1 for Remote Access Password, and 2 for Callback
Directory Number.
EntryWait_Time: 20 sec
Nxt 20 sec 10 sec 40 sec 60 sec
This configuration option only appears when the Special Security configuration option is set to RemAccsPswd
or CallbkDir#.
Entry Wait Timeout. Determines how long the answering modem waits for the originating modem to enter a VF-side
password.
VF_Prompt_Type: 2nd_DialTone
Nxt 2nd_DialTone Quiet_Answer
This configuration option only appears when the Special Security configuration option is set to RemAccsPswd
or CallbkDir#.
VF Prompt Type. Determines how the answering modem requests a valid password from the originating modem for the
valid password. This configuration option is only used for VF-side password entry and Special Security.
2nd_DialTone – Once the answering modem is off-hook, it generates a dial tone to the originating modem as a prompt
for that modem's VF-side password. (Second dial tone is represented by a W in the dial command string.)
Quiet_Answer – Once the answering modem is off-hook, it does not send an answer tone to the originating modem.
The originating modem enters its VF-side password after detecting a ringback signal followed by five seconds of silence.
For this to work correctly, the Auto Answer Ring # configuration option in the answering modem must be set to
2 rings or greater. (Quiet answer is represented by an @ in the dial command string.)
3920-A2-GH30-40 October 1998 5-75