Configuration Options; Cables - Paradyne COMSPHERE 3920PLUS Technical Reference Manual

Configuration Options

3920Plus A
3920Plus B
Sample Port Rate Table

Cables

Cable 1
Cable 2
Cable 4
3920-A2-GH30-40
Use Sync Leased (Answer) default configuration options with the following
exceptions:
Auto Dial Back
Rate
Use Sync Leased (Originate) default configuration options with the following
exceptions:
Auto Dial Back
Rate
Port
Port 1 Port 2
Rate
28.8K 9600 9600
24.0K 9600 Disable
19.2K 9600 Disable
16.8K 9600 Disable
14.4K 9600 Disable
12.0K Disable Disable
9.6K Disable Disable
7.2K Disable Disable
4.8K Disable Disable
2.4K Disable Disable
Use a standard, customer-supplied, EIA-232-D/V.24 cable with a DB-25-P (plug)
connector at one end to attach to the modem. Attach this to the connector labeled
DTE1.
Use part number 125-0053-1431 (an 8-position, 8-wire modular cord that is
supplied with the modem). Attach this to the connector labeled LEASED.
Use part number 125-0067-0031 (a 6-position, 4-wire modular cord that is
supplied with the modem). Attach this to the connector labeled DIAL.
October 1998
Set to Enable.
Refer to Sample Port Rate Table
Set to Enable.
Refer to Sample Port Rate Table
Port 3 Port 4
4800 4800
4800 4800
4800 4800
Disable 4800
Disable 4800
Disable 4800
Disable 4800
Disable 4800
Disable 4800
Disable Disable
Sample Configurations
in this section.
in this section.
G-9