COMSPHERE 392xPlus Modems
2-12
6. When the modem is installed properly and the power-up self-test completes, rotate the
circuit pack lock until it covers the faceplate latch (Figure 2-5). Tighten the retention screw
on the circuit pack lock. This prevents the modem from accidently being removed once it is
installed in a carrier.
7. Configure the modem as described in the
in this chapter.
CLOSED
RELEASE TAB
Figure 2-5. Circuit Pack Lock
Selecting Factory Configuration Options
LATCH
OPEN
October 1998
section
CIRCUIT
PACK
LOCK
495-14425-02
3920-A2-GH30-40