COMSPHERE 392xPlus Modems
SDC
When running synchronous data compression, the SDC function displays information about the
modem's transmitting and receiving DTE rate, compression ratio, and line efficiency.
To access SDC from the Status branch, make the following selections:
Select SDC.
Select either Tx (transmit) or Rx (receive).
The DTE Rate appears for the selected SDC Performance Tx or Rx. Press the
the SDC performance for DTE rate, compression ratio, and line efficiency measurements (see
Table 4-2
4-10
Once a connection terminates, the last valid parameters are locked
in place until the next connection.
Status:
SDC
V.34
F3
F1
F2
SDC Performance:
Tx
Rx
F3
F1
F2
SDC Perf: Rx
DTE Rate
nnnnnn
F3
F1
F2
for additional information).
October 1998
NOTE
>
key to view
3920-A2-GH30-40