Paradyne COMSPHERE 3920PLUS Technical Reference Manual page 50

The menu tree contains the following branches:
Quick Config —
Status
Configure
PList
Control
Test
SubHS
Call Setup
Talk/Data
Security
Remote
3920-A2-GH30-40
Used to display the basic operational characteristics of the modem.
— Used to monitor the current status of the VF line and DTE interface as well
as view the identity of the modem.
— Used to change and save the modem's configuration options.
— (Poll List) Used to identify downstream modems in order to support
multipoint health and status polling and multipoint link download
broadcasting.
— Used to control the modem's hardware and software functions.
— Used to begin and end various modem tests.
— (Sub-Network Health and Status) Used to display alarm conditions in
downstream modems.
— Used to dial, disconnect, and answer telephone calls as well as store up to
24 telephone numbers in directory locations.
— Used to switch the modem between Talk mode (the modem is disconnected
from the VF line) and Data mode (the modem is connected to the VF line)
when dialing via either the DCP or a telephone.
— Used to control the modem's dial access security. (The Security branch
only appears in Singleport mode.)
— Used to access and control a remote 392xPlus modem.
October 1998
DCP Operation
3-9