Dial - Paradyne COMSPHERE 3920PLUS Technical Reference Manual

COMSPHERE 392xPlus Modems
Status Configure

Dial

To access the Call Setup branch from the Top-Level menu, make the following selections:
Press the
Dial
For dial backup applications, Dial allows you to dial any telephone number stored in directory
locations 1–24. Any telephone number dialed using the DCP must already exist in a directory
location. Refer to
locations.
For leased backup applications, Dial allows you to switch to the backup leased line. Any valid
non-empty directory location may be used. The remote modem cannot automatically answer the
simulated call. Use the Answer function of the remote modem in conjunction with the Dial
function to manually switch to the backup leased line.
To access Dial from the Call Setup branch, make the following selection:
10-2
PList Control Test
(Dial
Backup
Answer Dial_Standby
Disconnect
Return_to_Dial
Directory Locations 1 - 24
Leased:33.6
Call_Setup
F1 F2
key until Call_Setup appears. Select Call Setup.
Change Directory
Call Setup:
Dial Disconnect
F1 F2
"Status"
SubHS
Call_Setup
only)
Change_Directory
or
F3
for information on storing telephone numbers in directory
>
F3
October 1998
Tlk/Data Security
Directory_Status
(Does not appear
in North America)
3920-A2-GH30-40
Remote