Editing And Saving A Configuration Option - Paradyne COMSPHERE 3920PLUS Technical Reference Manual

COMSPHERE 392xPlus Modems
The Configure branch consists of the following three levels:
• Ld EditArea frm. Allows the selection of the Active (Operating), Active (Saved),
• Choose Function. Allows you to make changes (Edit) to existing configuration options or
• Edit Strap Group. Contains the eight software configuration option groups that determine

Editing and Saving a Configuration Option

The following example shows how to change the Remote Access Password using the DCP. (If you
intend to access another 392xPlus modem via the Remote branch of the Top-Level menu, the
Remote Access Password must be the same for both modems.) By following these procedures you
learn how to load a factory preset configuration area (in this case, Sync Leased), how to edit a
configuration option (Remote Access Password), and how to save changes to a configuration area
(Active (Saved)). The shaded key indicates what key to press.
Select Configure from the Top-Level menu.
Scroll across the LCD and select the Factory configuration area.
5-4
Customer 1, Customer 2, and Factory configuration areas.
write (Save) these changes to either the Active (Saved), Customer 1, or Customer 2.
how the modem operates, plus the Security group, which can be viewed but not changed
using this branch.
Leased:33.6
Status Configure
F1 F2
Ld EditArea frm
Activ(Operating)
F1 F2
Ld EditArea frm
Factory
F1 F2
October 1998
F3
>
F3
<
F3
3920-A2-GH30-40