Set Answer Security Group Options; Set Answer Sec - Paradyne COMSPHERE 3920PLUS Technical Reference Manual

COMSPHERE 392xPlus Modems

Set Answer Sec

Set Answer Security determines if dial access security is enabled or disabled. This method of
inbound security is configured in the answering modem. Although this also appears under the
Security Configuration Option group, it can only be changed from the Set Answer Sec LCD
display in the Security branch.
To access Set_Answer_Sec from Set Access Ctrl, make the following selections:
Press the
Select Set_Answer_Sec.
Table 12-2 describes the settings of the Set Answer Security group option.
Set Answer Sec
No_Answ_Sec DTE_Only VF_&_DTE
Set Answer Security. Is the primary method for enabling or disabling the dial access security function.
No Answer Security – Disables the dial access security feature.
DTE Only – The answering modem is enabled for security. The originating user must supply a password when
prompted.
NOTE: A call attempt never enters data mode if the answering modem is configured for DTE_Only and the originating
caller attempts to enter a password using only the VF-side password entry technique.
NOTE: In modem pooling applications where modems are connected to a multiline hunt group (rotary), all modems
must have this configuration option set to the same value.
VF & DTE – The answering modem is enabled for security. The modems negotiate security using the VF-side password
entry technique protocol. If successful, and the Password Type for this particular VF password is set for VF_&_DTE, a
password is requested from the originating user. If successful, the modems connect and can pass data.
NOTE: A call attempt fails if the answering modem is configured for VF_&_DTE and the originating caller does not first
enter a VF-side password.
12-10
Set Access Ctrl
Set_Answer_Sec
F3
F1 F2
key until Set_Answer_Sec appears.
Table 12-2

Set Answer Security Group Options

October 1998 3920-A2-GH30-40