Paradyne COMSPHERE 3920PLUS Technical Reference Manual page 173

COMSPHERE 392xPlus Modems
• For Multiple download configurations, ensure that:
Cloning a Single TMp Remote
Press the F1 key to select Single Clone Remote.
The address field (xxx) displays the network management address of the modem that receives
the download. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
cursor ( _ ) under the digit to be incremented. Press the F2 (") key to increment the digit.
Press F1 (Ent) to select the modem that will receive the download.
The password field (yyyyyyyy) displays the remote access password for the modem that will
receive the download.
To increment digits within the password field (yyyyyyyy), use the
the cursor ( _ ) under the digit to be incremented. Press the F2 ( " ) key to increment the digit.
Press Enter (Ent) to select the modem that will receive the download.
After completing these actions, proceed to the section titled
Operation.
7-12
— the tributaries are responding properly to polls (this may take several minutes after the
control modem powers up). Refer to Chapter 9,
Branch, for more information.
— the control modem's active poll list contains all the network management addresses
for the remote 392xPlus tributary modems that will receive the download (refer to
Chapter 6, Poll List Branch).
— all 391x modems are removed from the active poll list.
Choose DLL Type >
Single Multiple
F1 F2
Choose Address:
"xxx
Ent
F1 F2
Choose Password:
"yyyyyyyy
Ent
F1 F2
October 1998
Sub-Network Health and Status
F3
F3
and
F3
Implementing a Clone Remote
keys to position the
and keys to position
3920-A2-GH30-40