Paradyne COMSPHERE 3920PLUS Technical Reference Manual page 171

COMSPHERE 392xPlus Modems
Clone Remote in Broadcast Configurations
A tributary modem configured for extended diagnostics (Diagnostic Connection configuration
option set to Modem(DC)) can perform two types of Remote Clone operations. It can clone the
upstream, VF connected, control modem (SC_Clone) or it can clone all the 392xPlus modems
attached to its downstream Diagnostic Channel (DC_Broadcast).
From the Choose DLL Type screen, press the F1 key to select SC_Clone to request the transfer
of an exact copy of the tributary modem's firmware to the VF connected control modem.
Proceed to the section titled
descriptions of multipoint cloning operations.
Cloning DC Broadcast Remote
Before using Clone Remote in DC Broadcast configurations, make sure the tributary modem's
active poll list contains all the network management addresses for the control modems that
receive the download (refer to Chapter 6,
are responding properly to polls (refer to Chapter 9,
From the Choose DLL Type screen, press the
F2 to transfer an exact copy of the tributary modem's firmware to the DC-connected control
modem(s) using the Active Poll list.
Proceed to the section titled
descriptions of multipoint cloning operations.
7-10
Choose DLL Type >
SC_Clone
F3
F1 F2
Implementing a Clone Remote
Poll List
Choose DLL Type >
DC_Broadcast
F3
F1 F2
Implementing a Clone Remote
October 1998
Operation, which follows the
Branch), and ensure that the control modems
Sub-Network Health and Status
key until DC_Broadcast appears. Press F1 or
Operation, which follows the
Branch).
3920-A2-GH30-40