Paradyne COMSPHERE 3920PLUS Technical Reference Manual page 159

COMSPHERE 392xPlus Modems
Change allows you to add modems to the Active poll list (Active), delete modems from both
Active and Skip poll lists (Delete), and move modems from the Active to the Skip poll list.
To implement Change, select the appropriate function (Active, Delete, or Skip). (For Skip, you
will need to press the
The function field (yyyyyy) displays the function selected (Active, Delete, or Skip).
The address field (xxx) displays the network management address of the modem to be changed.
The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
cursor ( _ ) under the digit to be incremented. Press the F2 (") key to increment the digit.
Press Enter (Ent) to implement the function (yyyyyy) you selected (Active, Delete, or Skip). The
message Command Complete appears on the second line of the LCD to indicate that the poll
list change occurred. If the message Poll List Check appears, you attempted to delete an address
that is not on the poll list, or you attempted to add an address that is already on the poll list. If
the message Poll Lst too Big appears, you exceeded the maximum number of downstream
devices. To return to the selected function (Active, Delete, or Skip), press the
address automatically increments upon returning to this function.
To exit this function (Active, Delete, or Skip) and remain in the PList Change branch, press the
6-4
Poll List:Chang
Active
F1 F2
key until Skip appears.)
Poll List:yyyyyy
"xxx
Ent
F1 F2
key. To exit and return to the Top-Level menu, press the
>
Delete
F3
F3
October 1998
and keys to position the
key. The
key.
3920-A2-GH30-40