Disconnect - Paradyne COMSPHERE 3920PLUS Technical Reference Manual

COMSPHERE 392xPlus Modems

Disconnect

For dial backup applications, use this function when you want to disconnect an established call
on a dial line. For leased backup applications, use this function to switch between the primary
leased line and the backup leased line.
To access Disconnect from the Call Setup branch, make the following selection:
Select Disconnect.
For dial backup applications, the modem goes on-hook (hangs up) and the call is disconnected.
The Command Complete status message appears.
To exit this function and remain in the Call Setup branch, press the
to the Top-Level menu, press the
10-4
Call Setup: >
Dial Disconnect
F3
F1 F2
Disconnect
Command Complete
F3
F1 F2
key.
October 1998
key. To exit and return
3920-A2-GH30-40