Paradyne COMSPHERE 3920PLUS Technical Reference Manual page 175

COMSPHERE 392xPlus Modems
Implementing a Clone Remote Operation
At this point, if you do not want to continue this process, abort the transfer by selecting any
function key. This returns the modem to the DwnLoadSoftware menu. However, to continue with
the transfer, press the
Press any function key to begin the transfer.
The local modem's LCD displays Establish Remote, indicating the modem is attempting to
establish a Remote Cloning Download session with the remote modem.
7-14
The modem begins a transfer of its own program to the remote
modem. This process takes the communication link
out-of-service for a period of time depending on the data rate
of the link. If the Clone Remote process is started and then
interrupted, the remote modem is left in a partially
programmed state in which its functional capabilities are
limited to those required to initiate and complete another
download attempt. If the mux is enabled when the Clone
Remote process is interrupted, disable the mux on the source
modem before you initiate another Clone Remote process. (Be
sure to reenable the mux when cloning is complete.)
Warning:Download
Abort_Download
F1 F2 F3
key to display the Reprogram_Remote selection.
Warning:Download
Reprogram_Remote
F1 F2 F3
RemClone Status
Establish Remote
F1 F2 F3
October 1998
WARNING
3920-A2-GH30-40