Configuration Edit/Display - Paradyne 7974 Installation Instructions Manual

Displaying Configuration Options
To display configuration options, you must first load a configuration into the edit area. To
load a configuration option set into the configuration edit area, follow this menu selection
sequence:
Main Menu
Make a selection by placing the cursor at your choice and pressing Enter.
If you select . . .
Current
Configuration
Default Factory
Configuration
Configuration
Loader

Configuration Edit/Display

The Configuration Edit/Display screen is displayed when the current or default
configuration is loaded. To access the Configuration Edit/Display screen, follow this
menu selection sequence:
Main Menu
– or –
Main Menu
main/config/edit
-----------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
Configuration (Load Configuration From)
Then . . .
The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
The Configuration Loader screen is displayed allowing you to
upload or download configurations from a TFTP server.
Configuration Current Configuration
Configuration Default Factory Configuration
CONFIGURATION EDIT/DISPLAY
Network
DSX-1 | SYNC Port | G.703
System Options
Communication Port
Management and Communication
9
Model: 797x
MainMenu Exit