Dte - Paradyne COMSPHERE 3920PLUS Technical Reference Manual

To exit the Identity function and remain in the Status branch, press the
return to the Top-Level menu, press the

DTE

DTE displays the state and/or activity of the following interface leads: LSD, DTR, DSR, TST,
TXD, RXD, RTS, and CTS. The interface leads status is updated every 5 seconds.
To access DTE from the Status branch, make the following selections:
Press the
Select the appropriate port by pressing the corresponding function key. Press the
scroll other ports into view. Only Ports 1 and 2 appear when the the DTE Bridge configuration
option is enabled.
This screen does not appear in Singleport mode.
The activity and state of the modem's DTE signal appear on the LCD's bottom line. Press the
The LCD's bottom line displays a pair of symbols for each interface lead. The first symbol
indicates the signal's activity since entering the DTE status display. An * (asterisk) indicates at
least one transition while a blank space indicates no transitions.
The second symbol indicates the state of the interface lead at the sampling time. A
block) indicates a Space or ON condition while an underscore ( _ ) indicates a Mark or OFF
condition.
To exit this function and remain in the Status branch, press the
Top-Level menu, press the
3920-A2-GH30-40
Status:
Identity
F1 F2
key until DTE appears. Select DTE.
Select DTE Port
Port1
F1 F2
LSD DTR DSR Tst >
_ *
F1 F2
key to scroll other signals into view.
key.
DTE
F3
>
Port2
F3
_
F3
key.
October 1998
Status Branch
key. To exit and
key to
(solid
key. To exit and return to the
4-9