Test Status Messages - Paradyne 9161 User Manual

Test Status Messages

9161-A2-GB20-00
The right-most column of the System and Test Status screen display the tests
that are currently active on the card (NAM or APM) (see Table 5-6).
Table 5-6. Test Status Messages (1 of 2)
Message
No Test Active
Network LLB Test Active
DSX-1 LLB Test Active
Network PLB Test Active
DSX-1 PLB Test Active
Network RLB Test Active
DSX-1 RLB Test Active
DCLB, Slot xx Port n
DTLB, Slot xx Port n
DTPLB, Slot xx Port n
Voice DLB, Slot xx Port n
Voice ALB, Slot xx Port n
Voice LLB, Slot xx Port n
Voice DRS, Slot xx Port n
Voice Quiet, Slot xx Port n
Forced Signal, Slot xx
Port n
Pttn Active
[Slot xx Port n ]
[Network][DSX-1]
1
xx represents physical slot and n represents port number.
November 1996
Maintenance and Troubleshooting
What It Indicates
No tests are currently running.
A network Line Loopback (LLB) test is active.
A DSX-1 Line Loopback (LLB) test is active.
A network Payload Loopback (PLB) test is active.
A DSX-1 Payload Loopback (PLB) test is active.
A network Repeater Loopback (RLB) test is active.
A DSX-1 Repeater Loopback (RLB) test is active.
A Data Channel Loopback (DCLB) test is active for the
1
identified slot and port.
A Data Terminal Loopback (DTLB) test is active for the
1
identified slot and port.
A Data Terminal Payload Loopback (DTPLB) test is active
for the identified slot and port.
A voice Digital Loopback (DLB) test is active for the
1
identified slot and port.
A voice Analog Loopback (ALB) is active for the identified
1
slot and port.
A voice Line Loopback (LLB) test is active for the
1
identified slot and port.
A voice Digital Reference (DRS) test is active for the
1
identified slot and port.
A voice quiet tone test is active for the identified slot and
1
port.
A forced signaling test is active for the identified slot and
1
port.
A pttn (test patterns for the Network, DSX-1, or Sync Data
port) is active for the identified slot and port.
2
1
5-13